Archangel 5 Gaming PC Series
Light Frame. Serious Foundation.
At Skytech Gaming, the chassis is chosen with the same scrutiny as the processor and graphics card — because it determines how much of that hardware's performance actually reaches you. The Archangel 5 is built on a mid-tower chassis engineered around side-mounted cooling: a full 360mm radiator position aimed across the graphics card, tempered glass that keeps the build on display, and a pre-installed control box that consolidates fan and lighting management into one clean system. Every feature exists to make the hardware inside run cooler, stay cleaner, and remain serviceable for years.
Why the Chassis Matters in a Prebuilt Gaming PC
Spec sheets celebrate processors and graphics cards. The chassis quietly decides how much of that performance you actually receive. Airflow geometry determines whether a flagship GPU holds its clock speeds through hour three of a session or throttles in the first thirty minutes. Cable architecture determines whether air moves freely or fights through clutter. Clearances determine whether next year's upgrade drops in or forces a rebuild. Skytech Gaming selects the Archangel 5 chassis with the same rigor applied to core components, because chassis quality is performance you keep — every session, every year.
Side-Mounted Cooling, Aimed Where Heat Lives
The Archangel 5 chassis positions its primary radiator mount on the side panel — directly alongside the graphics card, the hottest and hardest-working component in a gaming PC. Three 120mm or two 140mm positions accept radiators up to 360mm, letting cool air reach the GPU across its full length rather than arriving indirectly from the front. Combined with a 140mm rear exhaust and bottom intake, the result is a short, efficient thermal path: cool air in beside the card, hot air out the back. Sustained performance deep into long sessions, not just in benchmark runs.
One Control Box, Every Fan and Light
The chassis ships with a pre-installed control box that consolidates fan speed and ARGB lighting management into a single hub. For the system, this means fewer cable runs crossing the main chamber and less clutter interrupting airflow. For the owner, it means lighting and fan curves adjust from one place — no daisy-chained splitters, no tangle of separate controllers behind the motherboard tray. Skytech Gaming's builders route every connection into the hub during assembly, so the system arrives with cooling and lighting already unified.
Compact Footprint, Full-Scale Capability
At 238mm wide and 480mm tall, the Archangel 5 keeps a desk-friendly profile — yet the chassis interior still accepts full ATX motherboards, graphics cards up to 420mm, and tower air coolers up to 170mm. Skytech Gaming chose this chassis because it declines the usual trade-off between footprint and capability: the system sits comfortably beside a monitor while housing genuine flagship hardware.

Design & Aesthetics

Tempered Glass, Finished in White
The Archangel 5's tempered glass side panel puts the entire build on display — and the signature white chassis finish makes it read differently than anything else on a desk. Where black chassis absorb light, white reflects it: ARGB lighting spreads across the interior surfaces instead of disappearing into shadow, components stand out in higher contrast, and the whole system reads brighter and more open. Glass this revealing demands a build worthy of it, which is why every Archangel 5 is assembled to showcase standards — aligned components, routed cabling, tuned lighting.

Steel and Glass, Built to Arrive Intact
The chassis combines SPCC steel construction with tempered glass panels — materials chosen for rigidity, not just appearance. A structurally solid chassis resists flex and vibration under fan load, which means less resonance noise during operation and better protection during shipping. It is one of the reasons Skytech Gaming systems arrive fully assembled and ready to run, rather than in pieces with an instruction sheet.

Cable Grommets and a Clean Main Chamber
Two dedicated cable grommets guide power and data runs from the rear compartment into the main chamber without leaving raw openings or exposed bundles. Combined with the rear-routed cable channels, this lets Skytech Gaming's builders finish every Archangel 5 with cabling that stays out of the airflow path and out of sight. What faces the glass is hardware and light — nothing else.
Performance & Cooling
420mm GPU Clearance, Ready for the Future
With 420mm of graphics card clearance, the Archangel 5 chassis accepts the largest flagship GPUs available today, including oversized triple-fan designs. Paired with the side-mounted intake position feeding the card directly, big graphics cards do not just fit — they breathe. When upgrade time arrives years from now, the chassis will not be the limitation.
Cooling Headroom in Three Positions
The chassis supports radiators in three positions: side (up to 360mm), bottom (up to 240mm), and rear (120mm). For air-cooled builds, tower coolers up to 170mm clear the side panel comfortably. This range lets Skytech Gaming match every Archangel 5 configuration with thermal capacity suited to its exact hardware — and leaves headroom for owners who upgrade cooling later.
Serviceable and Expandable for the Long Run
Seven PCIe expansion slots and flexible drive bays — one 3.5" plus two 2.5", or three 2.5" — leave room for storage and add-in cards as needs grow. The chassis interior is laid out for access, so adding an SSD or swapping a graphics card takes minutes rather than an afternoon. Skytech Gaming builds on chassis this serviceable for exactly that reason: the system you buy today should stay relevant for the hardware of tomorrow.


Rich Front I/O Panel
Everything You Need, Right at Your Fingertips
Modern connectivity for streaming gear, capture cards, VR headsets, and high-speed external drives — positioned at the front panel where you can reach it without moving the system.
- ✦ USB 3.0 Ports × 2
- ✦ USB Type-C Port × 1
- ✦ HD Audio Jack × 1
- ✦ Reset Button × 1
- ✦ Power Button

Chassis Specifications
- Chassis Type
- Mid Tower ATX
- Motherboard Support
- ATX / Micro-ATX / Mini-ITX
- Dimensions (L × W × H)
- 458 × 238 × 480 mm
- Color
- White
- Side Panel
- Tempered glass
- Body Material
- SPCC steel + ABS
- Maximum GPU Length
- 420 mm
- Fits the largest flagship GPUs
- Maximum CPU Cooler Height
- 170 mm
- Maximum PSU Length
- 160 mm
- PCIe Expansion Slots
- 7
- Storage Bays
- 1 × 3.5" + 2 × 2.5" or 3 × 2.5"
- Front I/O
- Power, Reset, USB 3.0 × 2, USB Type-C × 1, HD Audio × 1
- Pre-Installed Fans
- Bottom: 1 × 140mm — Rear: 1 × 140mm ARGB
- Fan Support
- Side: 3 × 120mm — Rear: 1 × 140mm
- Control Box
- Pre-installed fan and ARGB hub
- Radiator Support
- Side: 360mm (3×120) or 280mm (2×140)
- Bottom: 240mm (2×120)
- Rear: 120mm
- Cable Grommets
- 2